The first rudimentary reel had consisted of a wooden spool with a metal ring that fitted over the angler's thumb. By 1770 a rod with guides for the line along its length and a reel was in common use. The first true reel was a geared multiplying reel attached under the rod, in which one turn of the handle moved the spool through several revolutions. Never popular in Great Britain, such reels became the prototype of the bait-casting reel as devised by two Kentucky watchmakers in the early 1800s. The predominant British reel was called the Nottingham reel, based on the wooden lace bobbin devised in that ancient lacemaking town. It was a wide-drum, ungeared, very free-running reel, ideal for allowing line and bait or lure to float downstream with the current and suitable for casting lures for predatory fish in various kinds of sea fishing. It was influential on the design of fly-fishing reels.
Rods were also improved as heavy native woods were superseded by straight-grained, tough, elastic woods, such as lancewood and greenheart from South America and the West Indies, and by bamboo. By the end of the 18th century a technique had been developed in which several strips of bamboo were glued together, retaining the strength and pliancy of the cane but greatly reducing the thickness. Between 1865 and 1870 complete hexagonal rods, made by laminating six triangular strips of bamboo, were produced on both sides of the Atlantic.
From 1880 tackle design evolved rapidly. Horsehair for the fishing line was replaced by silk covered with coats of oxidized linseed oil. Such lines were easily cast and sank heavily if ungreased, or floated if greased. The average angler could cast three times farther with these lines, and such methods as dry-fly and wet-fly fishing became possible. In the Nottingham reel, ebonite (a hard rubber) or metal replaced wood, so that it became even more free-spinning. Since the reel revolved faster than the line runoff, a considerable tangle (called an overrun in Britain, a backlash in the U.S.) could result. Governors were devised to prevent this. In 1896 William Shakespeare, of Kalamazoo, Mich., devised the level-wind, which automatically spread the line evenly as it was wound on the reel. In 1880 the firm of Malloch, in Scotland, introduced the first turntable reel, which had one side of the spool open. During casting, the reel was turned 90º, bringing it in line with rod guides, so that the line slipped easily off the end of the spool. For line recovery, the spool was turned back 90º. The reel was used mainly for casting heavy lures for salmon fishing, but it influenced the reel invented by the English textile magnate Holden Illingworth, which the British called a fixed-spool reel and the Americans a spinning reel. In this kind of reel, the spool permanently faces up the rod and the line peels off in the cast as with the Malloch reel.
In the 20th century, rods became shorter and lighter without sacrificing strength. Split bamboo was largely replaced by fibre glass and finally by carbon fibre as rod material. After the 1930s the fixed-spool reel was taken up in Europe and, after World War II, in North America and the rest of the world, creating a boom in spin casting. Nylon monofilament line was developed in the late 1930s and became dominant after World War II, as did braided lines in other synthetic materials. Plastic coverings for fly lines allowed them to float or sink without greasing. Plastic also became the dominant material for artificial casting lures.
Rods were also improved as heavy native woods were superseded by straight-grained, tough, elastic woods, such as lancewood and greenheart from South America and the West Indies, and by bamboo. By the end of the 18th century a technique had been developed in which several strips of bamboo were glued together, retaining the strength and pliancy of the cane but greatly reducing the thickness. Between 1865 and 1870 complete hexagonal rods, made by laminating six triangular strips of bamboo, were produced on both sides of the Atlantic.
From 1880 tackle design evolved rapidly. Horsehair for the fishing line was replaced by silk covered with coats of oxidized linseed oil. Such lines were easily cast and sank heavily if ungreased, or floated if greased. The average angler could cast three times farther with these lines, and such methods as dry-fly and wet-fly fishing became possible. In the Nottingham reel, ebonite (a hard rubber) or metal replaced wood, so that it became even more free-spinning. Since the reel revolved faster than the line runoff, a considerable tangle (called an overrun in Britain, a backlash in the U.S.) could result. Governors were devised to prevent this. In 1896 William Shakespeare, of Kalamazoo, Mich., devised the level-wind, which automatically spread the line evenly as it was wound on the reel. In 1880 the firm of Malloch, in Scotland, introduced the first turntable reel, which had one side of the spool open. During casting, the reel was turned 90º, bringing it in line with rod guides, so that the line slipped easily off the end of the spool. For line recovery, the spool was turned back 90º. The reel was used mainly for casting heavy lures for salmon fishing, but it influenced the reel invented by the English textile magnate Holden Illingworth, which the British called a fixed-spool reel and the Americans a spinning reel. In this kind of reel, the spool permanently faces up the rod and the line peels off in the cast as with the Malloch reel.
In the 20th century, rods became shorter and lighter without sacrificing strength. Split bamboo was largely replaced by fibre glass and finally by carbon fibre as rod material. After the 1930s the fixed-spool reel was taken up in Europe and, after World War II, in North America and the rest of the world, creating a boom in spin casting. Nylon monofilament line was developed in the late 1930s and became dominant after World War II, as did braided lines in other synthetic materials. Plastic coverings for fly lines allowed them to float or sink without greasing. Plastic also became the dominant material for artificial casting lures.
source from http://www.oldmaster85.com/
No comments:
Post a Comment